PeabodyRecruiter Since 2001
the smart solution for Peabody jobs

Quality Engineer

Company: Paradigm Precision
Location: Peabody
Posted on: September 15, 2019

Job Description:

Purpose/ SummaryThe Quality Engineer assures that the assigned products meet all of the customer purchase orders, drawing and specifications regarding the manufacturing of the assigned hardware. Develop inspection standards, support and guide inspection, manufacturing and Engineering personnel. Perform quality audits, monitor processes, ensure root cause and effective corrective action is implemented.Essential Duties and Responsibilities include the following. Other duties may be assigned -Responsible for the review of purchase orders, customer specifications and drawings.Work closely with the engineers to develop the quality plans within our manufacturing work instructions, tool gage concepts review and approval and the First Article Inspection plans.Work closely with the shop and engineering regarding the disposition of non-conforming material, Source Inspection and SPC analysis where required.Provide the flow of the requirements to our suppliers.Provide the technical support to the shop as required.Develop, define and initiate standards and methods of inspectionProvide guidance to inspection, operators and Engineering to assure compliance to specifications, Customer requirements and Regulatory agenciesIntegrate with Engineering to ensure flow down of key characteristics, and to develop effective quality control plansInitiate and/or approve Quality PlansProvide trainingReview travelers for material, special processing requirements and manufacturabilityDrive assigned improvement projectsFlow down Customer requirements to PurchasingDesign and develop inspection fixtures, tools and gagesProvide recommendations for improvementPerform Internal AuditsLiaison between Customer and Supplier on quality issuesSupport and implement Supplier nonconformance investigationsAssist in review and approval of work instructions.Provide Quality Clinic supportEstablish the sampling plans and over-inspection requirements to fulfill QMS requirementsDevelop quality plans for quality acceptance of partsPerform the root cause and corrective action system trainingProvide support to Value Stream Mapping processProvide Quality Assurance support of PFMEAPerform duties/responsibilities related to this position as assigned by the AQSSupervisory ResponsibilitiesThe job has no supervisory responsibilities.Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.The requirements listed below are representative of the knowledge, skills, and/or ability required.Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Strong written and oral communication skillsKnowledge and experience in welding and Non-Destructive TestingWorking knowledge of military, aerospace and defense specificationsThrough knowledge of manufacturing process and quality systemsTroubleshooting and Problem Solving experienceEDUCATION and/or EXPERIENCEB. S. Technical degree and a minimum of five (5) years of related experience. Must be familiar with CAD, word processing and spreadsheets. Working knowledge of SPC and Six Sigma/Lean Manufacturing techniques a plus. Four to eight years experience in quality assurance or manufacturingSPECIAL SKILLS:Resourcefulness, motivational and leadership skills.Capable of mentoring employees.Ability to elicit a team environment with subordinatesDrawings Interpretation and Geometric dimensioning and tolerancesKnowledge and experience with various machining operations, Quality Assurance systems, calibration and gaugingKnowledge and experience in welding and Non-Destructive Testing a plusKnowledge and experience with quality and continuous improvement (SPC, control plans, problem solving and Root Cause Analysis)First piece layout inspection ability to performGage Repeatability & ReproducibilityMachine capability analysis.WORK ENVIRONMENT:The characteristics described here are representative of those an employee encounters while performing the essential functions of this job.Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, electrical equipment, acetone, alcohol, argon, braze alloys, nitrogen, hydrogen, oil based lubricants and cleaning solutionsThe employee is occasionally exposed to moderate cold and extreme heat.The noise level in the work environment is usually middling.PHYSICAL DEMANDS:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.individuals with disabilities to perform the essential functions.While performing the duties of this Job, the employee is regularly required to sit and use hands to finger, handle, or feel.The employee is frequently required to talk or hear.The employee is occasionally required to stand; walk; reach with hands and arms and stoop, kneel, crouch, or crawl.The employee must occasionally lift and/or move up to 10 pounds.Specific vision abilities required by this job include close vision and color vision.Acknowledgements The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisorParadigm Precision is an Equal Opportunity employer and does not discriminate on the basis of race, ancestry, color, religion, sex, age, marital status, sexual orientation, national origin, medical condition, disability, veteran status, gender identity, or any other basis protected by law.

Keywords: Paradigm Precision, Peabody , Quality Engineer, Engineering , Peabody, Massachusetts

Click here to apply!

Didn't find what you're looking for? Search again!

I'm looking for
in category
within


Other Engineering Jobs


HVAC Mechanic
Description: Maintains, repairs, and install various refrigerant related equipment associated with the manufacturing process and climate control needs of Raytheon's Facilities. br Works from Wiring diagrams, schematic (more...)
Company: Raytheon
Location: Stow
Posted on: 09/18/2019

Remote Python Engineer
Description: Remote Python Engineer br We are a growing software company located in Boston whose data management and smart search solutions are utilized by the healthcare industry, and we are in search of an experienced (more...)
Company: CyberCoders
Location: Boston
Posted on: 09/18/2019

Sr Manufacturing Engineer I ( Production Manufacturing)
Description: Job Description:Senior Manufacturing Engineering support to the CCA Arrays Value Stream.Serve as interface between technicians, Quality, Engineering and Supply Chain in key execution role for on the floor (more...)
Company: Raytheon
Location: Concord
Posted on: 09/18/2019


DevOps Engineer
Description: DevOps Engineer br If you are a Systems Engineer with experience, please read on Located in Marlborough, MA we are a global company in the marketing industry seeking an experienced, highly motivated, (more...)
Company: CyberCoders
Location: Marlborough
Posted on: 09/18/2019

Full Stack Engineer
Description: Our EngX Engineering Experience team is hiring an engineer focused on full-stack user-facing engineering.--You have an opportunity to make a difference in this small and growing team that is involved (more...)
Company: Massachusetts Institute of Technology
Location: Quincy
Posted on: 09/18/2019

Sr Multi-Disciplined Eng I ( Materials Engineering)
Description: Raytheon Company's Integrated Defense Systems IDS Mechanical Engineering Directorate MED leads in mechanical hardware design, development and production of radar, sonar, torpedo and combat system (more...)
Company: Raytheon
Location: Andover
Posted on: 09/18/2019

Manufacturing Engineer I ( manufacturing design)
Description: IDS Manufacturing Engineering MfgE provides premier engineering and manufacturing support expertise to enable on-time, lowest cost hardware delivery with performance and reliability that exceed customer (more...)
Company: Raytheon
Location: Melrose
Posted on: 09/18/2019

Senior Hardware Quality Engineer
Description: br br Job Description: br What's YOUR Mission br br Here at Raytheon, we work together as one global team creating trusted, innovative solutions to make the world a safer place. Our innovation (more...)
Company: Raytheon
Location: Newton Center
Posted on: 09/18/2019

Manufacturing Engineer I ( third shift) - Surface Mount Tech
Description: The Manufacturing Engineering MfgE Department of Raytheon Integrated Defense Systems provides premier engineering and manufacturing support expertise to enable on-time, lowest cost hardware delivery (more...)
Company: Raytheon
Location: Andover
Posted on: 09/18/2019

Road Mechanic
Description: Join Our Team Sunbelt Rentals strives to be the customer's first choice in the equipment rental industry. From pumps to scaffolding to general construction tools, we aim to be the only call needed to (more...)
Company: Sunbelt Rentals, Inc.
Location: Woburn
Posted on: 09/18/2019

Log In or Create An Account

Get the latest Massachusetts jobs by following @recnetMA on Twitter!

Peabody RSS job feeds